Strong power magnetic swarf collectors and pickup tools magnetic clean rod for oil industry

How to clean the iron chips on Strong Power Magnetic Swarf Collectors?
Cleaning the iron chips on Strong Power Magnetic Swarf Collectors is an important maintenance step to ensure their continued effective work. Here are some recommended steps and precautions:
Preparation:
Before cleaning, make sure the Strong Power Magnetic Swarf Collectors have been turned off and disconnected from the power supply to avoid accidents during the cleaning process.
Prepare appropriate cleaning tools, such as gloves, scrapers, soft cloths or brushes, etc.
Preliminary cleaning:
Use a scraper or brush to gently scrape off large pieces of iron chips from the surface of the collector. These iron chips may accumulate on the surface of the collector, especially in places with strong magnetism.
Deep cleaning:
For iron chips that are difficult to scrape off, you can use a soft cloth dipped in an appropriate amount of detergent (be careful to choose a detergent that will not damage the collector material) to wipe.
If the collector has detachable parts, you can remove them for more thorough cleaning.
Inspection and maintenance:
During the cleaning process, check whether the magnet part of the collector is damaged or worn. If you find that the magnet's magnetic force is weakened or there are obvious scratches on the magnet surface, you may need to replace the magnet or repair it.
Check other parts of the collector, such as handles, brackets, etc., to make sure they are not damaged or loose.
Reuse:
After cleaning and maintenance, reassemble the collector and make sure all parts are firm and reliable.
Before reusing, make sure the collector is dry and free of any residue.
Precautions:
During the cleaning process, avoid using tools that are too sharp or hard to avoid scratching or damaging the surface of the collector.
Avoid using highly corrosive cleaning agents to avoid damage to the collector's materials.
Clean and maintain the collector regularly to ensure its continued effective work.
In summary, cleaning iron filings on Strong Power Magnetic Swarf Collectors needs to be done carefully and patiently to ensure the performance and life of the collector. By following the above steps and precautions, iron filings can be effectively removed and the collector can be kept in good condition.